Operating skills of mobile wood shredder equipment
If you are interested in our machine，
1. The mobile wood shredder should be tested before the machine is turned on before working. Simply rotate the main shaft to see if the bearing is running normally, check whether the gap between the components is firm before installation, and check whether the foundation is stable, because it is installed. Basically finalize the shape, it will be more time-consuming to re-install the wood shredder, and it is a waste of materials.
2. When the mobile wood shredder starts to operate, pay attention to whether there are debris on the mobile wood shredder. When moving the wood shredder to test the machine, check whether it is turned upside down. Put in less material to see if the finished product quality meets the standard. Move the wood After the customer of the shredder buys the machine and puts the wood when installing the test machine, try to wait for the first piece of wood to enter the feed inlet before putting the second piece in to avoid jamming.
3. Before starting and shutting down the mobile wood shredder, do circuit inspection to avoid leakage. The length of the wood must be moderate, not too long, it is best to be less than 30 cm, and not too thick.
- How to operate sawdust making machine to make materials finer
- sawdust making crusher is an expert in processing waste wood
- How to achieve dust-free operation of sawdust making machine
- The difference between sawdust making machine and other wood crushers
- The Importance of Fans for Large Sawdust Making Machine
- Details of sawdust making machine to ensure the quality of finished products
- How does the hammer blade of a sawdust making machine work
- Questions about the material of sawdust making machine knives
- How to solve the problem of sawdust making machine shaking during operation
- How to avoid unqualified output size from sawdust making machine
