sawdust making crusher is an expert in processing waste wood

The sawdust making crusher is mainly used for scrap wood such as branches, boards, scraps, etc. It is a special processing equipment for these waste wood. This is specifically for waste wood, because the internal structure of the sawdust making crusher is based on these raw materials when it is designed. How to design the machine to process these materials better, and how to design the sawdust making crusher to be more specific. Stronger is the original intention of the designer. Therefore, the sawdust making crusher can be said to be more suitable than any wood crusher when processing waste wood.

First of all, the design of its feed is very reasonable. The size of its feed port is not large, also because the size of its processed raw materials is also not large. Generally, the scraps at the corners are smaller wood, etc., which are too large. The material is also not suitable for crushing with a sawdust making crusher. Secondly, its double inlet allows the materials to be well classified when entering the crushing chamber. If the size is too large, it cannot be cut. Furthermore, when the sawdust making crusher is used to process scrap wood, the machine is equipped with an iron removal device, which can easily remove iron nails and other metal substances on the scrap wood, thus avoiding the time cost of manual removal. Because these iron nails are most likely to be found on scrap wood, the iron removal device is really very user-friendly.