How to solve the problem of sawdust making machine shaking during operation

During the operation of the sawdust making machine, due to the very large power, it will cause the entire machine to vibrate. If the machine is not fixed well over time, it will cause the machine to shake. If the machine shakes, the performance of the machine will be reduced, resulting in a A series of problems occur, which will affect the output in severe cases. This is very troublesome for users and violates the myth of wood crushers creating profits. So what can be done to reduce the problem of this kind of machine shaking during operation? Let’s analyze it from three aspects:

      First, when fixing the wood crusher, it must be fixed on the cement floor and must be fastened with bolts. You can use corner bolts to drill holes or use stones to press down the machine base;

       Second, if the wood crusher needs to change its working location frequently, the wood crusher must be installed on a base made of angle iron;

       Third, the pulleys of the wood crusher and the pulleys of the power machine must be parallel, and their pulleys must be on the same level, otherwise the belt will easily fall off during operation and cause the machine to shake.

       According to the requirements of these three aspects, always check whether the fixing bolts of the wood crusher are firmly fixed and whether the belt is normal. It is best to check every time the machine is run, so as to avoid the shaking problem of the machine to a large extent.