How to operate sawdust making machine to make materials finer

According to the different needs of users, the thickness standards that sawdust making machine must meet to crush materials are also different. Some users need products with high fineness requirements. This requires paying attention to some skills and methods during operation, so that they can easily produce products with high fineness. product, so how can we make the material finer? Today we will analyze it for you from three aspects.

       First, the material can be crushed more finely by adjusting the blade. Before operation, adjust the blade to the left and right along the axial direction. The smaller the gap between the oblique blade and the tapered surface, the higher the fineness, and vice versa; the lower the fineness;

       Second, adjust the wind cap of the sawdust making machine to make the material finer. When adjusting the hood, follow the principle that the lower the hood, the higher the fineness of the material, and vice versa;

       Third, adjust the air volume of the sawdust making machine to make the material finer. When adjusting the air volume, the smaller the air volume, the higher the fineness, and conversely, the lower the fineness. However, there are several points to pay attention to in this operation. First, the air door should be opened small, and then the air volume should be adjusted. The air volume should not be too small, otherwise it will cause material return. Mouth sprayed back.

       These techniques and methods must also be controlled with strength when operating. Do not over-operate to achieve the purpose. If over-operated, it will cause the sawdust making machine to malfunction or backfire.