The different mode for branch shredder discharge

The branch shredder manufacturer tells you that these are the common discharge methods, self-weight blanking, dust removal and mechanical conveying.

  1. Self-weight blanking means that the fan directly flushes the material out, and the material falls to the ground by its own weight. This kind of discharging is widely used in mobile tree shredder products. Because of the greater feature of the mobile tree shredder product, which is convenient to move, it is impossible to install the dust collector on the mobile branch shredder body. Therefore, this discharging method is more suitable for mobile wood chipper products. In addition, it can also be used with vehicles to directly aim the discharging port at the truck compartment, and the materials will land in the vehicle compartment for transportation.

    2. Dust removal and discharging. This discharging method is one of the current discharging methods with relatively small dust. The common dust collector equipped with our Lixin branch shredder is Shakelong, which is bag dust removal. This part is in the fan After the pipe, the fan will directly pump the crushed material from the bottom of the branch shredder into the pipe and send it to the bag for dust removal. The material will be separated from the air in the bag, fall into the dust collector and then untie the bag below the dust collector, and the material will spread. Now in front of users, the advantage of this kind of dust collector is that the dust is small.

     3. Mechanical conveying means that the conveyor directly conveys the materials in an assembly line. Generally speaking, users who use this discharging method mainly build production lines. After the crushing is completed, the branch shredder will fall directly from the discharge pipe to the conveyor, and then be transported by the conveyor to the next. A model or work station is processed again.