Detailed explanation of the screen replacement method of the wood shredder

The normal operation process of the wood shredder is very simple, and its fault repair is relatively simple. For users of wood shredders, it is necessary for us to thoroughly understand the various parts of the wood shredder before use. As long as there is a problem with mechanical equipment, we can solve the problem in time and reduce unnecessary economic losses. The replacement of the wood shredder screen is very simple, the whole process only takes a few minutes to complete, the process is as follows:

1. First spread the screen of the wood crusher on the lower mesh circle, and then use the tight mesh circle to stretch the mesh on the lower mesh circle. Be careful not to stretch the mesh too tightly, just stretch it flat.

2. Bolt the lower pressing mesh ring together with the special screen of the grading screen on the upper pressing mesh ring. Note that the bolts should be symmetrical and evenly pressed.

3. Finally, lock the screen body to the press ring according to the right picture. In addition, when choosing a screen, choose a screen with a larger diameter and a standard aperture. In addition, the tightness of the screen should be mastered when installing. Too loose or too tight is harmful to the wood shredder. In the process of using mechanical equipment, the protection lies in the ordinary. Especially in winter, the machinery and equipment are the same as people, and they also need to be conserved. As long as the protection of mechanical equipment is added. Only in this way can we extend the service life of the wood shredder and extend the life of the machine.