How to solve the heating problem of wood crusher running for a long time

The wood grinder that runs continuously for a long time should pay attention to cooling treatment. How to cool down the wood grinder after working for a long time. If the machine works for a long time, it will generate a certain temperature, so some machines can be cooled in some ways. But some are no way to cool down.

     The sawdust machine mainly relies on the water cooling system of the main machine to cool down. It adopts the way of circulating water, and the water is introduced into the inside of the main machine through the pipe to cool down. After the wood shredder works for a long time, it is mainly because the blades that work for a long time inside will definitely heat up after friction with the wood. Definitely damage the machine. But now the water-cooled working method is adopted, which can control the temperature and have a good protective effect, which can increase the working life and working efficiency of the whole machine.

      Wood chippers are high-energy-efficiency equipment whose main cutting materials are small-diameter wood, bamboo, veneer, and leftovers from harvesting secondary fuelwood after peeling. Its output is a matter of great concern to customers. The humidity of the wood raw material will affect the output of the wood chipper. Generally, the freshly cut wood needs to be dried for 3-5 days to achieve the best effect. Try to choose some relatively straight raw materials for wood. Or bent wood can be manipulated after preliminary processing. Pay attention to check the hammer bolts, if they are found to be loose, tighten them immediately, and replace them when the hammer and bolts are severely worn. It is strictly forbidden to put firewood with stones and nails into the machine to prevent damage to the knife and internal parts. If you encounter any problems in production, please contact us for consultation.