What are the factors that determine the material handling efficiency of a wood crusher?

When we choose a wood crusher, we cannot make a conclusion based only on the price of the wood crusher and the manufacturing appearance of the product. We need to go through many aspects of inspection and on-site testing before making a decision. Henan Shisheng Machinery summarizes the factors that affect the processing capacity of the wood crusher. The following six reasons

Known as a reference for customers to learn from.

   1. The actual quality of the wood crusher is based on whether the internal structure design is reasonable and whether the materials used pass the standards. This is to avoid the phenomenon that some manufacturers use low-hardness and high-brittle materials to make hammer heads and jaw plates, which cause serious wear and tear after long-term use and reduce output. .

   2. The hardness of the material. The harder the material, the more difficult it is for the wood crusher to crush, and the more severe the wear and tear on the equipment. It is easy to cause the wood crusher to run slowly, and as a result, the wood crusher's crushing capacity is smaller. Then the only way is to improve technology and purchase new materials for equipment production

   3. The humidity of the material, that is, when the moisture contained in the material is large, the material is easy to adhere to the wood crusher and is also prone to blockage during the unloading and transportation process, resulting in a reduction in the capacity of the wood crusher. Therefore, when conditions permit, the humidity of the material can be reduced as much as possible

   4. The fineness of the materials crushed by the wood crusher requires high fineness, that is, the finer the materials crushed by the wood crusher, the smaller the crushing capacity of the wood crusher. Then only by improving the relevant technology and equipment of the wood crusher can we ensure the fineness of raw materials and increase the output at the same time.

   5. The composition of the material. The more fine powder contained in the material before crushing by the wood crusher, the more it will affect the crushing of the wood crusher, because these fine powders are easy to adhere and affect transportation. Those with a large amount of fine powder should be screened in advance.

   6. The viscosity of the material. That is, the greater the viscosity of the material, the easier it is to adhere.

  In the production and manufacturing of wood crushers, Henan Shisheng Machinery welcomes your patronage with brand-new technology and low prices. The vertical ultra-fine timber wood crusher recently produced by our company has changed the crushing principle and manufacturing structure of the original wood crusher. The raw materials processed by this machine can reach between 30-1000 mesh, which can meet the normal processing requirements of laboratory scientific research and wood powder demand industries.