How to adjust the fineness of finished products in sawdust crusher

The requirements for the fineness of the finished products of the sawdust crusher are very strict, because some raw materials have certain requirements for their fineness. If the fineness does not meet the standard, it will not be used, and it will be treated as waste, so For sawdust crushers, it is very necessary to install a fineness analyzer.

The sawdust crusher is equipped with a fineness analyzer, which can control the fineness of the finished product. This needs to be adjusted according to the needs of the user. The fineness analyzer is adjusted before the material is crushed. After the finished product is discharged It is a standard finished product with a certain degree of fineness.

When it comes to adjusting the fineness of the finished product, not only can it be done by installing a fineness analyzer, but there are other methods, such as strengthening the quality of the blade, which can also make the material crushed finer, because the sharper the blade When crushing, the material can be crushed more thoroughly.

There is also a wood dust making machine that mainly crushes various common branches with a certain moisture content. The moisture content of the material also affects the fineness of the material to a certain extent. If the moisture content reaches the standard, the material will not be difficult to crush due to the high moisture content during crushing.