The fineness of the materials crushed by the wood crusher can be adjusted

When the wood crusher crushes materials, due to the different requirements of users for fineness, the fineness of the crushed materials is different. The same wood crusher crushes the same material, and the fineness of the output materials can also be different. Then This is because the wood flour machine itself has the function of adjusting the fineness, and the fineness of the material can be controlled through simple adjustment. The following will introduce it to you from three aspects.

      First, adjust the fineness of the material by adjusting the direction of the blade. Adjust the blade left and right along the axial direction. The smaller the gap between the inclined blade and the inclined surface, the smaller the fineness; otherwise, the higher the fineness;

     Second, adjust the fineness of the material by adjusting the air volume. The smaller the air volume, the higher the fineness, and conversely, the lower the fineness. It should be noted here that the air volume should not be too small, otherwise it will cause back spray;

      Third, adjust the fineness of the material by adjusting the fan blades of the main machine. The fineness of the material can be adjusted by reducing the number of fan blades in the casing. Reducing two or three fan blades can make the material finer.

      Through these three methods, the fineness of the material can be changed, so that different users can meet the needs no matter what they need the material for. This simple and feasible method allows the performance of the wood crusher to be better exerted .